Dake V-16 Bedienerhandbuch PDF herunterladen (Seite 12)

4/11/2007 12

MACHINE OPERATION

To operate the machine, do the following:

1. Turn the main power on, and then push the saw power button.

2. Now turn the run jog button to run, and then push the saw start button. The saw

blade will begin to move at the designated speed that is selected.

3. To change the blade speed, turn the blade speed knob to the desired speed by

turning left or right. It will take about 3 seconds for the digital tac to read the correct

speed.

4. To stop the saw blade push the saw blade stop button.

5. To turn the machine off turn the main power switch to off.

MACHINE MAINTENANCE

The maintenance of the machine is naturally based on the usage rather than a time

element. The following is a recommendation based-on-average usage, and adjustment to

the frequency can be made on an individual basis. See below graphic for locations.

• Chip Pan: Clean as required

• Band wheel tires: Remove embedded chips weekly, replace banding as necessary.

• Blade guide assemblies: Clean weekly

• Gear box: Maintenance free

• Blade tension assembly: Clean weekly

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Keine Kommentare

Dake V-16 Bedienerhandbuch Seite 12